beautypg.com

Multi tab function – John Lewis JLDWS 907 User Manual

Page 20

background image

20

3. All programmes with prewash need an

additional detergent dose (5/10 g) that
must be placed in the prewash
detergent chamber (2). This detergent
will be used during the prewash phase.
When using detergent tablets; place the
tablet in compartment (1).

Detergent tablets
Detergent tablets from different
manufacturers dissolve at different
rates. For this reason, some
detergent tablets do not attain their
full cleaning power during short
washing programmes. Therefore,
please use long washing programmes
when using detergent tablets, to
ensure the complete removal of
detergent residuals.

Multi tab function

This appliance is equipped with the Multi
tab function, that allows the use of combi
detergent tablets.
These products are detergents with a
combined cleaning, rinsing and salt
functions.
They can also contain other different agents
depending on which kind of tablets you
choose ("3 in 1", "4 in 1", "5 in 1" etc...).
Check whether these detergents are
suitable for your water hardness. See the
manufacturers instructions.
Once this function is selected it will remain
active for all following wash programmes.
With the selection of this function the
inflow of rinse aid and salt from each
respective supply container is automatically
deactivated and also the indicator lights for
salt and rinse aid are deactivated.
When using the Multi tab function, the
cycle durations may change. If this is the
case, the running time for the programme is
automatically updated on the digital display.

Activate/deactivate the Multi tab
function before the start of a
washing programme.
Once the programme is running, the
Multi tab function can NO longer be
changed. If you want to cancel the
Multi tab function you have to cancel
the programme setting and then
deactivate the Multi tab function.
In this case you have to set a
washing programme (and desired
options) again.