Vm9410, Controls and indicators – Jensen Mobile Multimedia AM/FM/DVD Receiver VM9410 User Manual

Page 6

VM9410

CONTROLS AND INDICATORS

Button Operation

1. OPEN

Press the OPEN button (1) to activate the automatic
mechanical system and move the TFT monitor into viewing
position.

2. WIDE/PICTURE

Press the WIDE/PICTURE button (2) to adjust the display
aspect of the picture to one of three settings: Wide, Full or
Normal.

3. (

)

Press the button (3) to adjust the upward tilt angle of the
screen one step at a time. Press and hold this button to
continuously adjust the upward tilt.

4. (

)

Press the

button (4) to adjust the downward tilt angle of the

screen one step at a time. Press and hold this button to
continuously adjust the downward tilt.

5. DSP

Press the DSP button (5) to display system information on
the screen. Press and hold this button to enter/exit System
Function set-up.

6. SEL/LOC/DX

Rotate the SEL/LOC/DX knob (6) to adjust the volume. Press
and release to enter and/or confirm audio settings. Press and
hold to activate the Local (LOC) setting.

7. POWER/MUTE

Press the POWER/MUTE button (7) once to turn the unit on.
Press again to mute the volume. Press and hold to turn the
unit off.

8. 1/DISC-

DVD Mode: Press to select audio language during playback.

TUNER Mode: Press once to play preset radio station
channel 1. Press and hold to store the current radio station in
preset channel 1.

CDC Mode: Press to play the previous disc.

9. 2/DISC+

DVD Mode: Press once to select the subtitle language during
playback.

TUNER Mode: Press once to play preset radio station
channel 2. Press and hold to store the current radio station in
preset channel 2.

CDC Mode: Press to play the next disc.

SRC

PWR

VM9410

ENTER

Push

AV AUX IN

7-INCH TFT

OPEN

DVD-R

LO/DX

16 19

2-6CH