Jura Capresso IMPRESSA C5 User Manual

Page 43

8 Maintenance

Insert the empty drip tray and coffee grounds container

back in the machine.

The cleaning operation is now complete. The Maintenance

symbol

flashes, the IMPRESSA heats up and is once again

ready for use.

You can initiate the “Cleaning the machine” operation manually.

Start when the first prompt appears

, as described under “Cleaning

following a prompt”.

The IMPRESSA builds up deposits of limescale over time and auto-

matically prompts you to descale it when necessary. The degree of

calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

Avoid contact with the skin or eyes.

Rinse the descaling agent off with clean water. Should you get

any descaling agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam-

aged and/or traces of detergent could be left behind in the water.

Use only original JURA care products.

If the descaling operation is interrupted, it is possible that the

machine could be damaged.

Allow the descaling program to run to the end.

If the descaling agent comes into contact with sensitive surfaces, the

possibility of damage cannot be excluded.

Clean up any splashes immediately.

The descaling program lasts approx. 40 minutes.

Your dealer will stock JURA descaling tablets.

Try out the “Descaling the machine” operation online. Visit

the Knowledge Builder on www.jura.com.

Manual cleaning

Descaling the machine

CAUTION