Jura Capresso IMPRESSA C5 - Manual (Page 35)

35
5 Preparing drinks at the touch of a button
r l Turn the switch in the anticlockwise direction.
The milk foam will be prepared.
t l Turn the switch in the clockwise direction when there is
sufficient milk foam in the cup.
As long as the light segment continues to flash by the switch,
you can continue preparing milk foam.
To ensure that the Easy Cappuccino Frother works perfectly, you
should clean it daily. Further information can be found in Chapter 8,
“Maintenance – cleaning the Easy Cappuccino Frother”.
To obtain a perfect water flow, attach the removable hot water
nozzle.
There is a danger of scalding from hot water splashes.
Avoid direct contact with the skin.
Start by replacing the nozzle:
Carefully remove the Easy Cappuccino Frother from the
Connector System © .
Take the hot water nozzle out of the Welcome Pack.
Insert this into the Connector System © with a light turning
motion.
Place a cup under the hot water nozzle.
Precondition: your IMPRESSA is ready for use.
r l Turn the switch in the anticlockwise direction.
The light segment on the switch will light up and hot water
will flow into the cup.
t l Turn the switch in the clockwise direction when there is
sufficient water in the cup.
o
l
l
l
l
l
Hot water Hot water
CAUTION CAUTION