Jura Capresso IMPRESSA C5 - Manual (Page 36)

36
6 Adjusting the permanent cup size settings
It is easy to adjust the amount of water for all coffee specialities to
the cup size for good. As in the following example, adjust the amount
of water once. Every time you prepare a drink in the future, this
amount of water will be dispensed.
Permanent adjustment of cup size works the same way for all coffee
specialities.
Example: to permanently adjust the amount of water for an
Espresso, you should proceed as follows:
Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a .
m l Keep the Rotary Switch pressed down until the light seg-
ment flashes above the Rotary Switch.
Coffee preparation will start and the Espresso will flow into
the cup.
m l Press the Rotary Switch again when enough Espresso has
flown into the cup.
Espresso preparation will now stop. Your IMPRESSA will
remember the amount of water you have specified for an
Espresso for good.
You can alter these settings at any time by repeating the
above procedure.
l
o
6 Adjusting the permanent cup size settings 6 Adjusting the permanent cup size settings