Jura Capresso IMPRESSA C5 - Manual (Page 22)

22
3 Familiarising yourself with the control options
Example: this is how to prepare an Espresso.
Place an Espresso cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 Espresso setting a .
m l Press the Rotary Switch to initiate preparation of the
Espresso.
The 1 Espresso symbol a will now flash, and the pre-set
amount of water wll flow into the cup.
Drink preparation stops automatically.
You can change both the coffee strength and the amount of water
while your drink is being prepared. These settings are not saved.
One-off settings during coffee preparation always follow this
model.
During the grinding operation, the light segments above the
Rotary Switch indicate the coffee strength. The coffee strength
can be altered while 1 Espresso or 1 coffee is being prepared.
The coffee strength options available are as follows:
Coffee strength Shown in symbol display
Mild 1 light segment is illuminated
Normal 2 light segments are illuminated
Strong 3 light segments are illuminated
During the brew operation, the light segments indicate the
amount of water. At this stage of the operation, you can change
the amount of water by turning the Rotary Switch.
Example: this is how to prepare a strong coffee.
Place a cup under the coffee spout.
ä l Turn the Rotary Switch to the 1 coffee setting d .
l
o
o
l
O ne-off setting during
drink preparation O ne-off setting during
drink preparation