JVC CA-MXJ100 - Manual (Page 19)

– 14 –
English
Playing Back a Tape
1
Press EJECT
0 for the deck you want to use.
2
Put a cassette in, with the exposed part of the
tape down.
• You can play back only the type I tapes.
3
Close the cassette holder gently.
If you put cassettes in both decks A and B, the deck which
you have put a cassette into last is selected.
To operate the other deck, press TAPE A/B.
4
Press TAPE
3 3 3 3 3.
The tape play starts.
When the tape plays to the end, the deck
automatically stops .
0 EJECT
Playing Back Tapes
For Deck A
To stop during play, press 7.
To operate the other deck, press TAPE A/B, then TAPE
3.
To fast-forward the tape, press ¡ (or ¢ / ¡ on the
remote control).
To rewind the tape, press
1 (or 4 / 1 on the remote
control).
To remove the cassette, press
0 EJECT for deck A or
EJECT 0 for deck B.
The use of the C-120 or thinner tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch-
rollers and the capstans.
For Deck B
TAPE
0 EJECT
EN12-14.CA-MXJ100[E]/f 00.4.3, 11:55 AM 14