JVC CA-MXJ100 - Manual (Page 12)

– 7 –
English
SPEAKERS
IMPEDANCE 6-16 OHMS.
+
+
–
–
R
L
1 Connect the AM (MW/LW) loop antenna to
the AM ANT terminal as illustrated.
2 Turn the AM (MW/LW) loop antenna until
you have the best reception.
For better reception of both FM and AM (MW/LW)
• Make sure the antenna conductors do not touch any other
terminals and connecting cords.
• Keep the antennas away from metallic parts of the unit,
connecting cords, and the AC power cord.
AM (MW/LW) antenna
AM (MW/LW) loop
antenna (supplied)
Connecting Speakers
You can connect a pair of the front speakers.
Right
speaker
Left
speaker
1 Press and hold the clamp of the speaker
terminal on the rear of the unit.
2 Insert the end of the speaker cord into the
terminal.
Match the polarity of the speaker terminals: Red (+) to
red (+) and black (–) to black (–).
3 Release the finger from the clamp.
IMPORTANT: Use only speakers with the same speaker
impedance as indicated by the speaker terminals on the
rear of the unit.
1 2, 3
Red Black
Speaker
cord Speaker
cord
AM ANT
EN01-11.CA-MXJ100[E]/f 00.5.10, 0:39 PM 7