Playing back cds, Loading cds – JVC CA-MXJ100 User Manual
Page 17
– 12 –
English
Loading CDs
1
Press OPEN/CLOSE
0 on the
unit or CD
0 on the remote
control.
The unit automatically turns on and the
carousel comes out.
2
Place one or two discs correctly on
the front slots of the carousel, with its label
side up.
• When using a CD single (8 cm), place it on the inner
circle of the disc tray.
3
If you wish to load a third disc,
press DISC CHANGE on the unit
(or DISC SKIP on the remote
control).
The carousel rotates by 120˚.
4
Press OPEN/CLOSE
0 or CD 0
on the remote control again.
The carousel closes, and the corresponding
disc number indicator (disc 1 to disc 3)
lights up on the display.
About the disc indicators
Each disc indicator corresponds to the disc tray of the same number.
• The disc indicator flashes while the corresponding CD is currently
selected.
• The disc indicator goes off when the unit has detected that there is
no CD on the corresponding disc tray.
2
1
3
Playing Back CDs
Playing Back CDs
You can play CDs continuously.
1
Load CDs.
2
Press REPEAT on the unit
(or REPEAT on the remote
control) to select a play mode
you want.
Each time you press the button, play modes
change as follows:
ALL CD:
Plays all loaded CD. (When you turned on
the unit, “ALL CD” is automatically
selected.)
1CD:
Plays back one CD.
REPEAT 1:
Repeats one track on one CD.
REPEAT 1CD*: Repeats all the tracks on one CD.
REPEAT ALL CD: Repeats all the tracks on all the CDs ,
or all the tracks in the program.
*REPEAT 1CD is not used for Program play.
3
Select the disc you want to
start play from.
On the unit :
Press one of the disc number
buttons (CD 1, CD 2, and CD 3).
On the remote control :
Press DISC SKIP repeatedly.
CD play starts from the first track of the selected disc.
• Pressing CD
6 instead of the disc number buttons
starts playing back if a CD is on the trays.
To stop during play, press
7.
To stop play for a moment
Press CD
6.
“PAUSE” appears on the display.
To resume play, press CD
6 again.
To remove the disc, press OPEN/CLOSE
0 or CD 0 on the
remote control.
Continued
Track number
Elapsed playing time
CORRECT
INCORRECT
Disc number
Disc indicator
OPEN / CLOSE
OPEN / CLOSE
CD
DISC CHANGE
DISC SKIP
2
1
VOL
Disc No.
flashes
2
1
VOL
CD
1
CD
2
CD
3
REPEAT
REPEAT
REPEAT ALL CD
REPEAT 1CD
REPEAT 1
1 CD
ALL CD
DISC SKIP
CD
CD
EN12-14.CA-MXJ100[E]/f
00.4.3, 11:55 AM
12