JVC DLA-M5000LU - Manual (Page 63)

63
ENGLI
S
H
DEUTSH
FRAN
Ç
AIS
ITALIANO
ESPA
Ñ
OL
DLA-M5000CLU (Re)/ LCT0978-001B / ENGLISH
Specifications
■ Optical mechanism system
■ Electrical system
■ Input / output
• Projection method 3D-ILA device, 1 lens, 3 primary color optical shutter method
• D-ILA device 0.9" measured diagonally (1365 pixels × 1024 pixels) × 3 (Total number of pixels: 4,193,280)
• Projecting lens
(separately available)
GL-M4023SZ 3:1~7:1 zoom lens
GL-M4015S 1.5:1 fixed focus lens
• Screen size 60" to 300" [recommended] to 600" [maximum] measured diagonally (*with aspect ratio: 4 : 3)
• Light-source lamp 1.6 kW xenon lamp
• Color system NTSC, NTSC 4.43, PAL, SECAM ( * Automatic switching / manual switching)
• Resolution 1365 dots × 1024 dots (*S-XGA full resolution, during RGB input)
1000TV lines ( *Horizontal resolution, aspect ratio 4 : 3, during video input)
• Scanning frequency Horizontal frequency : 15 kHz ~ 82 kHz
Vertical frequency : 48 Hz ~ 78 Hz
[EXT. IN (AV IN input)] * The Y/C (S-video) and VIDEO (composite video) signals can be input with the video board
installed.
• Y/C 1-line, mini-DIN 4 pin × 1 (* With the video board, separately available, installed)
Y (luminance signal) : 1V(p-p), 75 Ω (negative sync)
C (chroma signal) : 0.286V(p-p) (burst signal), 75 Ω [NTSC]
0.3V(p-p) (burst signal), 75 Ω [PAL]
• VIDEO 1-line, BNC × 1 (* With the video board, separately available, installed)
Composite video signal : 1V(p-p), 75 Ω (negative sync)
• Y, P B /B-Y, P R /R-Y 1-line, BNC × 3
Component (Y, B-Y, R-Y) signals
Y
: 1V(p-p), 75 Ω (negative sync or 3-value sync)
P B /B-Y : 0.7V(p-p), 75 Ω
P R /R-Y : 0.7V(p-p), 75 Ω
DTV-format signals
[480i (ITU-R BT. 601-4), 480p (SMPTE 293M)]
Y
: 1V(p-p), 75 Ω (negative sync)
P B , P R : 0.7V(p-p), 75 Ω
[720p (SMPTE 296M), 1080i (SMPTE 274M)]
Y
: 1V(p-p), 75 Ω (3-value sync)
P B , P R : 0.7V(p-p), 75 Ω
[RGB IN (RGB input)]
• RGB IN-1 (PC)
1-line, D-sub 3-row 15 pin × 1
Analog RGB signal
R
: 0.7V(p-p), 75 Ω
B : 0.7V(p-p), 75 Ω
G : 0.7V(p-p), 75 Ω
G on Sync : 1V(p-p), 75 Ω (negative sync)
Sync signal : 1V(p-p) to 5V(p-p), high impedance (positive/negative polarity)
* Some connected devices may not correspond to composite sync (C S ) or G on sync signal.
• RGB IN-2 1-line, BNC × 5
Analog RGB signal
R
: 0.7V(p-p), 75 Ω
B : 0.7V(p-p), 75 Ω
G : 0.7V(p-p), 75 Ω
G on Sync : 1V(p-p), 75 Ω (negative sync)
DLA-M5000LU&SCU Eng Re.book Page 63 Tuesday, March 12, 2002 3:56 PM