JVC 1001MKV*UN*SN - Manual (Page 27)

27
MAKE CONNECTIONS
1) JVC VCR EQUIPPED WITH REMOTE
PAUSE TERMINAL
Connect the editing cable to the Remote
PAUSE terminal.
JVC VCR NOT EQUIPPED WITH
REMOTE PAUSE TERMINAL BUT
EQUIPPED WITH R.A. EDIT
CONNECTOR
Connect the editing cable to the R.A.EDIT
connector.
VCR OTHER THAN TYPE OR
Connect the editing cable to the RM-V700U’s
PAUSE-IN connector
g
.
2) Insert a recorded tape into the camcorder and
set the Power Switch
@
to “ ”.
3) Turn the VCR power on, insert a recordable
tape and engage the AUX mode (refer to the
VCR’s instructions).
If your VCR has an S-Video input connector,
connect the camcorder and the VCR using a
commercially available S-Video cable. This can
improve the dubbed picture quality.
To EDIT
Connector
Open
the cover.
To S-Video
Output
connector To Video Output
and Audio Output
connectors
S-Video cable
(commercially
available) A/V cable
(provided)
To Remote
PAUSE
VCR
TV
To
g
Editing cable
(ø3.5 mini-plug
cable) (commer-
cially available)
To Audio, Video
and S-Video Input
connectors
RM-V700U
(optional)