JVC 1001MKV*UN*SN - Manual (Page 21)

21
TAPE LENGTH
Allows you to set the tape length depending on the
tape used: T30=30 minutes, T45=45 minutes,
T50=50 minutes, T60=60 minutes.
• Tape remaining time
1
is correct only if the
correct tape length has been selected.
DISPLAY
FULL: Makes all of the indications appear on the
LCD monitor*/viewfinder during playback or
recording.
SIMPLE: Makes the following indications
disappear from the LCD monitor*/viewfinder during
recording or playback:
, tape remaining time,
, tape length (
੬
pg. 9, 17).
* Applicable models only.
OSD OUTPUT
ON: On-screen indications are displayed.
OFF: On-screen indications are turned off except
Date/Time, Instant Title and Warning Indication.
REC TIME
You can shoot a series of pictures, each slightly
different, of the same object for a brief selected
period of time (Animation). REC MODE should be
set to “SP”.
Select the desired recording time and press the
Recording Start/Stop Button
!
after focusing on
the subject.
• The remote control can also be used for this
setting*. (
੬
pg. 25, “Animation And Time-Lapse”)
• Fade- or wipe-in/out cannot be performed.
• This function is cancelled when the power is shut
off or when the cassette is ejected.
*GR-SXM78EA/SXM780A/SXM480A/SXM280A only
INT. TIME
You can record sequentially at preset time spans.
Leaving the camcorder aimed at a specific subject,
you can record subtle changes over an extended
period of time (Time-Lapse). REC MODE should
be set to “SP”.
Select the desired interval time and press the
Recording Start/Stop Button
!
.
• The remote control can also be used for this
setting*. (
੬
pg. 25, “Animation And Time-Lapse”)
• Fade- or wipe-in/out cannot be performed.
• This function is cancelled when the power is shut
off or when the cassette is ejected.
*GR-SXM78EA/SXM780A/SXM480A/SXM280A only
TELE MACRO
When set to “ON”, you can shoot a subject as large
as possible at a distance of approx. 60 cm.
Depending on the zoom position, the lens may go
out of focus.
MENU LANG.
Allows you to select the language (ENGLISH,
CHINESE or ARABIC) of messages only in menu
screens (CAMERA MENU, SYSTEM MENU or
their sub-menus).
TITLE LANG.
Allows you to select the language (ENGLISH,
RUSSIAN, CHINESE or ARABIC) of TITLE in
CAMERA MENU. After selection, the TITLE setting
menu (
੬
p. 19) appears automatically.
DATE/TIME
Allows you to set the current date and time.
(
੬
pg. 7)
DEMO MODE
Demonstrates certain functions automatically.
Available when the Power Switch
@
is set to “ ”
or “ ” and “DEMO MODE” is set to “ON” (factory-
preset). Performing any operation during the
demonstration stops the demonstration
temporarily. Set to OFF to stop completely.
• When a tape whose erase protection tab is in the
position that allows recording is loaded in the
camcorder, demonstration is not available.
• If you do not detach the Lens Cap, you cannot
see the actual changes of the Automatic
Demonstration activated on the LCD monitor* or
viewfinder.
* Applicable models only.