IBM PANEL1173-841 - Manual (Page 78)

PANEL1173-841 User’s Manual
Power Supply Specification 70
LOAD CAPACITY SPECIFICATIONS
The cross regulation defined as follows, the voltage regulation limits
DC include DC Output ripple & noise.
LOAD +3.3V +5V +12V -12V +5VSB
Condition_1 X X X X 2A
Condition_2 0.5A 0.3A 1A 0A 0.1A
Condition_3 0.5A 2A 2A 0.8A 0.1A
Condition_4 1A 2A 17A 0.1A 0.1A
Condition_5 1A 10A 4A 0.1A 0.1A
Condition_6 4.5A 18A 12A 0.1A 0.1A
Condition_7 12A 2A 2A 0A 0.1A
Condition_8 17A 9.7A 10.5A 0.8A 2A
HOLD-UP TIME (@FULL LOAD)
115V / 60Hz : 17 mSec. Minimum.
230V / 50Hz : 17 mSec. Minimum.
OUTPUT RISE TIME
(10% TO 95% OF FINAL OUTPUT VALUE, @FULL LOAD)
+3.3Vdc 20ms Maximum
+ 5Vdc 20ms Maximum
+ 12Vdc 20ms Maximum
+ 5Vsb 20ms Maximum
115V-rms or 230V-rms
- 12Vdc 20ms Maximum
OVER VOLTAGE PROTECTION
Voltage Source Protection Point
+3.3V 3.76V – 4.8V
+5V 5.6V – 7.0V
+12V 13.0V – 16.5V