Integra DTR-8.8 - Manual (Page 54)

54
First Time Setup —Continued
Notes:
• To listen to the component connected to the multi-
channel input, press the [Audio Selector] button
repeatedly to select Multich (see page 85).
• This procedure can also be performed on the AV
receiver by using its [Setup], [Enter], and arrow but-
tons.
The new “1–6. Picture Quality” item has been added to
the “1. Input/Output Assign” menu. This menu and its
settings can be accessed just like the other menus. The
settings are explained below.
■ Picture Mode
DVD-Video disc content originates from either film
(recorded at 24 frames per second) or video intended for
TV (recorded at 30 frames per second). With the default
Picture Mode setting of Auto, the AV receiver automati-
cally detects the type of content and processes it accord-
ingly to achieve the best picture quality. If the AV
receiver detects the type of content incorrectly due to
characteristics of the disc, you can select Video or Film
manually.
Auto: The type of content is detected automati-
cally and processed accordingly (default).
Video: Select when playing a DVD-Video disc
whose content originates from video.
Film: Select when playing a DVD-Video disc
whose content originates from film.
■ Edge Enhancement
With Edge Enhancement, you can make the picture
appear sharper.
Off: Edge enhancement off (default).
Low: Low edge enhancement.
Medium: Medium edge enhancement.
High: High edge enhancement.
■ Mosquito NR
With Mosquito Noise Reduction, you can remove the
shimmering or haziness that sometimes appears around
objects in the picture. Mosquito noise can be an issue
with overly compressed MPEG content.
Off: Mosquito noise reduction off (default).
Low: Low mosquito noise reduction.
Medium: Medium mosquito noise reduction.
High: High mosquito noise reduction.
■ Random NR
With Random Noise Reduction, you can remove indis-
criminate picture noise, such as film grain.
Off: Random noise reduction off (default).
Low: Low random noise reduction.
Medium: Medium random noise reduction.
High: High random noise reduction.
■ Block NR
With Block Noise Reduction, you can remove the block
distortion that sometimes appears in the picture. Block
noise can be an issue with overly compressed MPEG
content.
Off: Block noise reduction off (default).
On: Block noise reduction on.
3 Use the Up and Down [ ]/[ ]
buttons to select “5. Analog
Input,” and then press [Enter].
The Analog Input menu appears.
4 Use the Left and Right [ ]/[ ]
buttons to select an input selec-
tor.
You can assign the multichannel input
to the following input selectors: DVD,
VCR/DVR, CBL/SAT, GAME/TV,
AUX 1, AUX 2, TAPE, CD, or
PHONO.
5 Press the [Setup] button.
Setup closes.
Enter
Enter
1-5.Analog Input
Multich DVD
Enter
Setu
p
Picture Quality Menu