Hdmi out (49), First time setup —continued – Integra DTR-8.8 User Manual

Page 49

First Time Setup

—Continued

Notes:

• If the video source contains information that restricts

output at high-resolutions, 720p or 1080i content will
not be converted.

• See page 30 for charts showing how the HDMI Moni-

tor setting affects the video signal flow through the AV
receiver.

• This procedure can also be performed on the AV

receiver by using its [Setup], [Enter], and arrow but-
tons.

Using the HDMI Out Button

The HDMI Monitor setting can also be set to No, Main,
or Sub by using the [HDMI Out] button on the AV
receiver.

Use the Up and Down [

]/[

]

buttons to select “Resolution,”
and use the Left and Right
[

]/[

] buttons to select:

Through:

Select this to pass video

through the AV receiver at the
same resolution and with no
conversion (default).

Auto:

Select this to have the AV
receiver automatically con-
vert video at resolutions not
supported by your TV. (Not
available when the HDMI
Monitor setting is set to No.)

480p:

Select this for 480p output
and video conversion as nec-
essary.

720p:

Select this for 720p output
and video conversion as nec-
essary.

1080i:

Select this for 1080i output
and video conversion as nec-
essary.

1080p:

Select this for 1080p output
and video conversion as nec-
essary. (Not available when
the HDMI Monitor setting is
set to No.)

Use the Up and Down [

]/[

]

buttons to select “Monitor Out2,”
and use the Left and Right
[

]/[

] buttons to select:

Monitor:

Select this if you’ve con-

nected the COMPONENT
VIDEO MONITOR
OUT 2/ZONE 2 OUT to a TV
or other component in your
main room.

Zone 2:

Select this if you’ve con-
nected the COMPONENT
VIDEO MONITOR
OUT 2/ZONE 2 OUT to a TV
in Zone 2.

When Monitor is selected, the COM-
PONENT VIDEO MONITOR
OUT 2/ZONE 2 OUT outputs the same
video as the COMPONENT VIDEO
MONITOR OUT 1.

Enter

Press the [HDMI Out] button.

The current setting is displayed.

Press the [HDMI Out] button
repeatedly to select:

No:

Select this if your TV is con-
nected to a video output other
that the HDMI OUT MAIN
or HDMI OUT SUB.

Main:

Select this if your TV is con-
nected to the HDMI OUT
MAIN.

Sub:

Select this if your TV is con-
nected to the HDMI OUT
SUB.

Note:

• When Main or Sub is selected, the

onscreen setup menus are output by
only the HDMI outputs.

If you’re

not using the HDMI outputs and
select Main or Sub by mistake and
the menus disappear, press the AV
receiver’s [HDMI Out] button so
that “HDMI Monitor: No”
appears on the display.

1, 2