Invacare Wheelchair Pronto M91 Base - Manual (Page 68)

SECTION 10—TRANSPORT READY PACKAGE
Pronto® M91™Base with SureStep® 68 Part No 1143153
About Transport Ready Packages
TRRO includes four factory‐installed transport brackets and a wheelchair anchored
pelvic belt. TRRO has been crash‐tested in accordance with ANSI/RESNA WC Vol 1
Section 19 Frontal Impact Test requirements for wheelchairs with a 168 lb crash dummy,
which corresponds to a person with a weight of 114 to 209 lbs.
TRBKTS includes four factory‐installed wheelchair transport brackets. TRBKTS has not
been crash‐tested in accordance with WC 19. Invacare recommends that these transport
brackets be used only to secure an unoccupied wheelchair during transport.
As of this date, the Department of Transportation has not approved any tie‐down systems
for transportation of a user while in a wheelchair, in a moving vehicle of any type. It is
Invacare’s position that users of wheelchairs should be transferred into appropriate
seating in vehicles for transportation and use be made of the restraints made available by
the auto industry. Invacare cannot and does not recommend any wheelchair
transportation systems.
Compliance Information
This wheelchair conforms with the requirements of the ANSI/RESNA WC/Vol. 1 ‐ Section
19.
NOTE: ANSI = American National Standards Institute, RESNA= Rehabilitation Engineering
and Assistive Technology Society of North America.
This wheelchair has been dynamically tested in a forward‐facing mode with the specified
crash test dummy, which corresponds to a person with a weight of 114‐209 pounds,
restrained by Both pelvic and shoulder belts in accordance with ansi/resna wc Vol 1
Section 19. Both pelvic and upper torso belts should be used to reduce the possibility of
head and chest impacts with vehicle components.
Specifications
MODEL WHEELCHAIR WEIGHT LIMIT
M91 Standard Up to 300 lbs
M91 Heavy Duty Up to 400 lbs