Depth, Ƽ warning – Invacare Wheelchair Pronto M91 Base User Manual

Page 51

SECTION 7—FOOTBOARD ASSEMBLY

Depth

NOTE: For this procedure, refer to FIGURE 7.3.

1. Remove the quick release pin that secures the footboard assembly to the wheelchair

frame.

ƽ WARNING

Make sure the detent balls of the quick release pin are fully released and protruding

past the outer edge of the tube before operating the wheelchair. Otherwise, injury

and/or damage may result.
Keep detent balls clean.

2. Adjust footboard to one of three mounting positions.

3. Install the quick release pin. Make sure the detent balls of the quick release pin are

fully released and past the outer edge of the tube (Detail “A”).

FIGURE 7.3 Adjusting the Footboard Assembly - Depth

DETAIL “A” - BOTTOM

VIEW OF FOOTBOARD

Quick Release Pin

Outer Edge

of Tube

Detent Balls

Quick

Release

Three

Depth

Adjustment

Holes

Wheelchair Frame

Detent

Ball

Footboard

Assembly

Mounting

Hole