Invacare Wheelchair Pronto M91 Base - Manual (Page 53)

SECTION 8—SHROUD/WHEELS
Part No 1143153 53 Pronto® M91™Base with SureStep®
Installing
1. Perform one of the following:
• Top Shroud ‐ Position top shroud on to the base frame and gently press down on
top shroud to secure the four hook and loop strips that secure the top shroud to the
base frame (Detail “A”).
• Front Shroud ‐ Position front shroud onto the two base frame hooks. Turn release
knob ¼‐turn to the locked position (Detail “B”).
2. Perform one of the following:
• Wheelchairs with Formula PTO Plus ‐ Tilt the seat forward. Refer to Tilting the
Seat Assembly on page 47.
• Wheelchairs without Formula PTO Plus ‐ Reinstall the seat. Refer to Removing/
Installing the Seat Assembly on page 46.
FIGURE 8.1 Removing/Installing the Shrouds
DETAIL “B” - FRONT SHROUD DETAIL “A” - TOP SHROUD
Top Shroud
Rear of
Wheelchair
Front of
Wheelchair
Seat Supports
Hook and
Loop Strips
Base Frame
Release
Knob
Front
Shroud
Base
Frame
Hooks