Intel System Board G4H875-N - Manual (Page 67)

6 7
3
BIOS Setup
3.1.2.4 CPU L3 Cache
This field is used to enable or disable the CPU’s L3 cache.
3.1.2.5 Hyper-Threading Technology (for Intel ® Pentium ® 4 Processor
with Hyper-Threading Technology only)
This field is used to enable the functionality of the Intel ® Pentium ® 4
Processor with Hyper-Threading Technology and will appear only
when using this processor.
3.1.2.6 Quick Power On Self Test
This field speeds up Power On Self Test (POST) whenever the
system is powered on. The BIOS will shorten or skip some check
items during POST. To attain the shortest POST time, select “Fast”.
3.1.2.7 First Boot Device, Second Boot Device, Third Boot Device and
Boot Other Device
Select the drive to boot first, second and third in the “First Boot
Device” “Second Boot Device” and “Third Boot Device” fields
respectively. The BIOS will boot the operating system according to
the sequence of the drive selected. Set “Boot Other Device” to
Enabled if you wish to boot from another device.
3.1.2.8 Boot Up Floppy Seek
When enabled, the BIOS will check whether the floppy disk drive
installed is 40 or 80 tracks. Note that the BIOS cannot distinguish
between 720K, 1.2M, 1.44M and 2.88M drive types as they are all 80
tracks. When disabled, the BIOS will not search for the type of floppy
disk drive by track number. Note that there will not be any warning
message if the drive installed is 360KB.
3.1.2.9 Boot Up NumLock Status
This allows you to determine the default state of the numeric
keypad. By default, the system boots up with NumLock on wherein
the function of the numeric keypad is the number keys. When set to
Off, the function of the numeric keypad is the arrow keys.