Intel System Board G4H875-N - Manual (Page 33)

33
2
Hardware Installation
2 1 O N
2.4.4 Power-on Select
!
1-2 On:
Power-on via
power button
(default)
3
1
2
3
1
2
JP6
2-3 On:
Power-on via
AC power
This jumper is used to select the method of powering on the
system. If you want the system to power-on once AC power
comes in, set JP6 pins 2 and 3 to On. If you want to use the
power button, set pins 1 and 2 to On.