Hardware installation, 7 irda connector – Intel System Board G4H875-N User Manual
Page 51
51
2
Hardware Installation
2
1
ON
2.6.7 IrDA Connector
Connect your IrDA cable to connector J7 on the system board.
Note:
The sequence of the pin functions on some IrDA cable may be
reversed from the pin function defined on the system board.
Make sure to connect the cable to the IrDA connector
according to their pin functions.
BIOS Setting
Configure IrDA in the Integrated Peripherals submenu (“Super IO
Device” section) of the BIOS.
Driver Installation
You may need to install the proper drivers in your operating
system to use the IrDA function. Refer to your operating system’s
manual or documentation for more information.
"
1
5
VCC
N. C.
IRRX
Ground
IRTX