Repositioning upper mounting bracket, Remove phillips screw and set aside, Remove the inner tube from the outer tube – Invacare 9000 Topaz User Manual
Page 59
11 OPTIONS
59
Invacare®9000 Topaz™Wheelchair
Repositioning Upper Mounting Bracket
1.
With the telescoping I.V. rod in the lowest position, align the hole of the outer tube with the phillips screw of the inner tube.
2.
Remove phillips screw and set aside.
3.
Remove the inner tube from the outer tube.
4.
Firmly grasp the height adjustment assembly and pull to remove from the outer tube.
5.
Slide the upper mounting bracket up off the outer tube.
6.
Rotate the upper mounting bracket 180° and reinstall onto the outer tube.
7.
Reverse STEPS 1-5 to reassemble the telescoping I.V. rod.
For this procedure, refer to FIGURE 7 on page 60.
This adjustment is required if the telescoping I.V. rod must be mounted on the right side of the wheelchair.
See also other documents in the category Invacare Communication:
- LC34 (8 pages)
- 2GT (176 pages)
- 1055947 (2 pages)
- 1145549 (4 pages)
- 6027 (8 pages)
- 01-349 (4 pages)
- Compass XE (12 pages)
- BUZZ HMV (52 pages)
- Excel Power Sling Seat (4 pages)
- Front Anti Tippers 1326 (2 pages)
- Wheelchair 3G Ranger X (6 pages)
- 6291E Adult (16 pages)
- 6845-5 (2 pages)
- XtraTM 1026793 (60 pages)
- Formula TRE (174 pages)
- 6300-5F (36 pages)
- 1048922 (2 pages)
- Wheelchair XP6520 (64 pages)
- 1141466 (8 pages)
- F-6 (52 pages)
- 95-1 (20 pages)
- Auriga10 (63 pages)
- XLT (76 pages)
- 1335 (2 pages)
- 1069956 (2 pages)
- CareGuard (2 pages)
- 1085144 (8 pages)
- 1610 (8 pages)
- Lightweight (64 pages)
- At'm (44 pages)
- 65100R-JR (40 pages)
- Crossfire T6A (6 pages)
- Comfort-Mate Extra / Comfort-Mate Extra Base (4 pages)
- IVC Heavy Duty Shower Chair 9781 (16 pages)
- Lynx L-3X (60 pages)
- GET-U-UP LIFT (28 pages)
- V18PLR (1 page)
- Excel (152 pages)
- 400 (50 pages)
- 9000 (24 pages)
- 4M900 (255 pages)
- A1541 (2 pages)
- ITFG (24 pages)
- 1300 (1 page)