Invacare 9000 Topaz - Manual (Page 25)

4 SAFETY INSPECTION/TROUBLESHOOTING.
Part No 1100869 25 Invacare®9000 Topaz™Wheelchair
4 Safety Inspection/Troubleshooting.
4.1 Safety Inspection Checklists
Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow these maintenance
procedures:
Inspect/Adjust Initially
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect for loose or missing hardware on frame and crossbraces.
❑ Inspect for bent frame or crossbraces.
❑ Check that the wheel locks do not interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Check that the wheel locks are easy to engage.
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect seat and back for rips and sagging.
❑ Inspect seat for damaged or missing warning label.
❑ Inspect seat and back for loose or broken hardware.
❑ Inspect back cane hand grips for wear/looseness/deterioration.
❑ Inspect seat positioning strap for any signs of wear. Ensure buckle latches. Verify hardware that attaches strap to frame is secure and undamaged.
Replace if necessary.
❑ Inspect tires for flat spots and wear.
 Every six months or as necessary, take your wheelchair to a qualified technician for a thorough inspection and servicing.
Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your wheelchair. To operate
properly and safely, your wheelchair MUST be cared for just like any other vehicle. Routine maintenance will extend the life
and efficiency of your wheelchair.