11 options, Warning, 1 installing crutch and cane carrier – Invacare 9000 Topaz User Manual
Page 52: Installing, Position the base parallel to the step tube, Remove the upper back upholstery screw and washer, Safety and maintenance, Check base weekly to assure proper placement, Securely fasten strap while carrying items, Locknut
11 OPTIONS
Invacare®9000 Topaz™Wheelchair
52
11 Options
11.1 Installing Crutch and Cane Carrier
Installing
1.
Slide the clamp with the base attached over the end of the step tube of the wheelchair.
2.
Position the base parallel to the step tube.
3.
Securely tighten the locknut that secures the base to the step tube of the wheelchair.
4.
Remove the upper back upholstery screw and washer.
5.
Align the strap with the back upholstery screws mounting hole.
6.
Secure the strap to the wheelchair with the back upholstery screw
and washer.
Safety and Maintenance
1.
Check base weekly to assure proper placement.
2.
Securely fasten strap while carrying items.
3.
Never insert or remove items while wheelchair is moving.
4.
Base should be parallel to step tube to avoid bending spokes when
folding the wheelchair.
5.
The base cleans easily with any chrome or glass cleaner. The strap
can be cleaned with mild soap and water.
FIGURE 1 Installing Crutch and Cane Carrier
ƽ
WARNING
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened securely. Otherwise
injury or damage may occur.
Locknut
Step
Tube
Clamp
Base
Strap