Intel GA-EQ45M-S2 - Manual (Page 10)

GA-EQ45M-S2 Motherboard - 10 -
1-2 Product Specifications
CPU  Support for an Intel ® Core TM 2 Extreme processor/
Intel ® Core TM 2 Quad processor/Intel ® Core TM 2 Duo processor/
Intel ® Pentium ® Dual-Core processo/Intel ® Celeron ® processor
in the LGA 775 package
(Go to GIGABYTE's website for the latest CPU support list.)
 L2 cache varies with CPU
Front Side Bus  1333/1066/800 MHz FSB
Chipset  North Bridge: Intel ® Q45 Chipset
 South Bridge: Intel ® ICH10DO
Memory  4 x 1.8V DDR2 DIMM sockets supporting up to 16 GB of system memory (Note 1) (Note 2)
 Dual channel memory architecture
 Support for DDR2 800/667 MHz memory modules
(Go to GIGABYTE's website for the latest memory support list.)
Onboard Graphics  North Bridge:
-
1 x D-Sub port
- 1 x DVI-D port (Note 3)
Audio  Realtek ALC888 codec
 High Definition Audio
 2/4/5.1/7.1-channel
 Support for S/PDIF In/Out
 Support for CD In
LAN  Intel 82567LM chip (10/100/1000 Mbit)
Expansion Slots  1 x PCI Express x16 slot, running at x4
(Refer to page 19 for the graphics cards support list.)
 1 x PCI Express x1 slot
 2 x PCI slots
Storage Interface  South Bridge:
-
6 x SATA 3Gb/s connectors supporting up to 6 SATA 3Gb/s devices
- Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
 iTE IT8213 chip:
-
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
 iTE IT8718 chip:
-
1 x floppy disk drive connector supporting up to 1 floppy disk drive
USB  Integrated in the South Bridge
 Up to 12 USB 2.0/1.1 ports (6 on the back panel, 6 via the USB brackets
connected to the internal USB headers)