Intel MINI-ITX BOARD AR-B1890 - Manual (Page 42)

AR-B1890 User’s Manual 41
Load Fail – Safe Defaults
This menu contains the most appropriate values of the system parameters that
allow minimum system performance.
Load Optimized Defaults
This menu allows you to load the factory defaults for BIOS and Chipset
features which the system automatically detects.
Set Supervisor Password
When you select this function, the following message will appear at the center
of the screen to assist you creating a password.
Type the password, up to eight characters and press . You will be
asked to confirm the password. Type the password again and press .
You may also press to abort the selection and not enter a password.
To disable a password , just press when you are prompt to enter the
password. A message “PASSWORD DISABLED” will appear to confirm the
password being disabled. Once the password is disabled, the system will boot
and you can enter Setup freely.
Save & Exit Setup
This menu allows you to determine whether to accept modifications or not. If
you type “Y”, you will quit the Setup Utility and save all you setup value to the
CMOS. If you type “N”, you will return to Setup Utility.
Exit Without Saving
This menu allows you to exit the Setup Utility without saving the changes. If
you type “Y”, you will quit the Setup Utility without saving to CMOS. If you type
“N”, you will return to Setup Utility.