Intel SOCKET 370 CELERON TS-ASP3 - Manual (Page 21)

HARDWARE INSTALLATION
17
Suspend Mode LED Lead (2-pin S_LED)
The S_LED will light when the system is in suspend mode.
Pin2 : +5V
Pin4 : GND
Hard Disk LED Lead (2-pin HDD_LED)
This 2-pin connector connects to the LED of the hard disk. The LED lights up when a HDD is
active.
Pin6 : +5V
Pin8 : GND
Reset Switch Lead (2-pin RESET)
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without turning on your power switch.
Pin14 & Pin16
Soft Power-Off Lead (2-pin SOFT_OFF)
Attach the SOFT_OFF switch of the panel to this connector. Use the switch to Power On/Off
your system.
Pin18 & Pin20