IBM All-in-One Super7 Single Board Computer PCM-5896 - Manual (Page 76)

64 PCM-5896 User Manual
The displayed configuration is based on the manufacturer's SETUP
DEFAULTS settings.
Power Management
This option allows you to select the type (or degree) of power
saving for Doze, Standby, and Suspend modes.
This table describes each power management mode:
Max Saving Maximum power savings. Only Available for
SL CPUs. Inactivity period is 1 minute in
each mode.
User Define Set each mode individually. Select time-out
periods in the section for each mode,
below.
Min Saving Minimum power savings. Inactivity period is
1 hour in each mode (except the hard
drive).