Os/2 – IBM All-in-One Super7 Single Board Computer PCM-5896 User Manual
Page 105
Chapter 4 Driver Installation 93
OS/2
These drivers are designed to function with the OS/2 Version 4.0, 3.0
and 2.11 operating systems.
To install this driver, do the following steps:
1. Open an OS/2 full screen or windowed session.
2. Place the Supporting CD-ROM into your CD-ROM drive.
3. At the OS/2 command prompt, type the following commands to
copy the files to the OS/2 drive:
cd-rom:\CD ROM\model name\driver\vga driver\os2\setup.cmd
"cd-rom" : the drive letter of your CD-ROM drive
"model name" : the model number of your product
When the Setup Program is completed, you will need to perform a
shutdown and then restart the system in order for changes to take
effect.
A log of the information output during the install can be found
in
4. After restarting the system, perform the following steps:
1. Open the OS/2 System folder.
2. Open the System Setup folder.
3. Open the Display Driver Install Object.
This step will execute the Display Driver Installation (DSPINSTL)
utility program to finish installation of the new drivers.
4. When the Display Driver Install window appears, select
Primary Display and then select OK.
5. When the Primary Display Driver List window appears, select
"Chips and Technologies 69000" from the list of adapter types,
then select OK or install the video driver.