Interphase Tech 4538 - Manual (Page 129)

Chapter 5: Connectors and Front Panel
4538 Hardware Reference Manual 107
Connector Summary
Carrier Card Specification
CompactPCI Carrier Card
Interphase has defined a combination of cards to allow 4538 rear access configurations in
CompactPCI chassis. The combination comprises a 4538 "rear access", a CPCI carrier card
and an Interphase 6435 Rear Transition Module. The CPCI carrier card must be a Motorola
CPV8540 or Motorola MCPN750 or a CPCI card conforming to the routing requirements
described in
Table 5-8 and Table 5-9 . See also PMC Connector P4 on page 103 for P4
connector compatibility.
N
OTES
■ The Motorola cards will not allow the “Switched Mode” capability.
■ Contact Interphase for additional information on Switched Mode compatibility
Interconnections between CPCI J14 (PMC P4) and J3 are described in Table 5-8 .
Interconnections between CPCI J24 (PMC P4) and J5 are described in Table 5-9 .
Figure 5-5. 4538 Connectors
Connector Usage
3 3 ELW 3&, EXV
3 7HOHFRP &RQQHFWRU
- 7(- OLQH IURQW SDQHO
- 7(- OLQH IURQW SDQHO
- (WKHUQHW IURQW SDQHO
- 56 77< IURQW SDQHO
- -7$*GHEXJ SRUW
-3 ,63 SURJUDPPLQJ
-3 %ODQN FDUG ERRW HQDEOH
Table 5-8. CompactPCI J3 Pin-Out
ROW A ROW B ROW C ROW D ROW E
9 9 9 9 9
30&,2 30&,2 30&,2 30&,2 30&,2