Intel GA-4MXSV - Manual (Page 46)

4 6
GA-4MXSV Motherboard
Boot -time Diagnostic
When this item is enabled, system will shows Diagnostic status when system boot.
Enabled Enable Boot-time Diagnostic.
Disabled Disable this function. (Default value)
Reset Configuration Data
Yes Reset all configuration data.
No Do not make any changes. (Default value)
NumLock
This option allows user to select power-on state for NumLock.
On Enable NumLock.
Off Disable this function.
Memory Processor Error
When Boot is selected, the system will attempt to boot after a memory or proocessor error
occured.
Boot System attempts to boot if a memory or proocessor error cooured.
(Default value)
Halt System will stop if an error is detected during power up.
Multiprocessor Specification
This option allows user to configure the multiprocessor(MP) specification revision level. Some
operating system will require 1.1 for compatibility reasons.
1.4 Support MPS Version 1.4 . (Default value)
1.1 Support M PS Version 1.1.