Integra DTR-4.5 - Manual (Page 64)

64
Zone 2 —Continued
To use Zone 2, you must make this setting. It enables the
speakers connected to the ZONE 2 SPEAKERS termi-
nals so that they produce sound when Zone 2 is used.
Note:
• This procedure can also be performed on the AV
receiver by using its [Setup] button, arrow buttons, and
[Enter] button.
Setting the Powered Zone 2
1 Press the [Receiver] button fol-
lowed by the [Setup] button.
The main menu appears onscreen.
2 Use the Up and Down [ ]/[ ]
buttons to select “1. Initial
Setup,” and then press [Enter].
The Initial Setup menu appears.
3 Use the Up and Down [ ]/[ ]
buttons to select “3. Hardware
Setup,” and then press [Enter].
The Hardware Setup menu appears.
Display Muting
Random Rec
Last Memory Angle Subtitle Audio
Memory Search A-B Repeat
Exit
Gu id e
Prev
CH
TV VOL
--/---
Dimmer
Tape
TV
Input
Sleep
Enter
Test Tone CH SEL
Surround
Direct
Stereo All ST
Level+ Level-
L Ni h
DSP DSP
To p M enu Men u
Set up Retu
rn
VOL CH
Disc
SAT T V VCR Cable
DVD Receiver C D
+10 0 Clear
7 8 9
Video Off Open/Close
Macro
1 2 3
MD/CDR
Ci Fl
+
-
Input Selector
Remote Mode
Zone 2
2–4
2, 3
1, 5
1
Receiver
Enter
Enter
Enter
Enter
4 Use the Up and Down [ ]/[ ]
buttons to select “a. Powered
Zone 2,” and use the Left and
Right [
]/[ ] buttons to select:
Not Activated: Zone 2 SPEAKERS
terminals deactivated.
Activated: Zone 2 SPEAKERS termi-
nals activated.
When Zone 2 is activated and turned on
(see page 66), the speakers connected
to the ZONE 2 SPEAKERS terminals
output sound, but the speakers con-
nected to the SURROUND SPEAK-
ERS and CENTER SPEAKER
terminals do not. (When Zone 2 is acti-
vated but not used, the surround speak-
ers and center speaker work as normal.)
5 Press the [Setup] button.
The setup menu closes.
Enter
Menu
------------------------
1.Initial Setup
2.Speaker Setup
Advanced Setup
3.Surround Setup
4.Audio Adjust
5.Listening Mode Preset
6.Preference
Basic Setup
1.Initial Setup
------------------------
2.Component Video
3.Hardware Setup
1.Digital Input
1-3.Hardware Setup
------------------------
:Not Activated
b.Zone2 Out
:Fixed
a.Powered Zone2