Integra DTR-4.5 - Manual (Page 50)

50
Basic Operation —Continued
The following table lists all the listening modes and shows which modes can be selected for each input signal format.
Input signal format
Analog,
PCM*1
1. In the Direct listening modes, PCM signals at 32 kHz, 44.1 kHz, and 48 kHz are processed at 64 kHz, 88.2 kHz, and 96 kHz respectively. 96 kHz
signals are processed at 48 kHz for all listening modes other than Direct, and Stereo.
Dolby D DTS/DTS 96/24*2
2. In the Direct, Stereo, and DTS 96/24 listening modes, signals are processed as DTS 96/24. Everything else processed as DTS.
Multich
*/2 2/0
1/
0,1+1
Other */2 2/0
1/0,
1+1
Other
Source CD, TV, LD,
VHS, MD,
turntable,
radio,
cassette, DTV,
etc.
DVD, DTV, etc. DVD, LD, CD, etc. DVD
Listening mode
Direct ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Stereo ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Mono ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
PLII Movie/Music/Game *3
3. Cannot be selected if the Center and Surr parameters are set to “None” or the Zone 2 speakers are being used.
❍ ❍ ❍
Dolby D ❍ ❍
DTS, DTS 96/24 ❍ ❍
Multich ❍
Mono Movie
❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Enhance
Orchestra
Unplugged
Studio-Mix
TV Logic
All Ch Stereo ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Full Mono ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍
Theater-Dimensional ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍ ❍