Mitel SX-200 - Manual (Page 46)

5312/5324 IP Phones User Guide
Place the conference unit in Presentation mode
Presentation Mode is used when only one individual is speaking to a group. If another member in the
group wishes to speak, you must disable Presentation Mode. Presentation Mode minimizes
extraneous noise.
To place the conference unit in Presentation mode
• Press Presentation Mode key on the mouse.
Mute the Conference Unit
To mute the conference unit so that conversation in the meeting room cannot be heard by individuals
being conferenced:
• Press (Mute key) on the mouse.
Exit the conference
• Press Power key on the mouse.
Using the 5310 Conference Unit without a Mouse
Use the procedures below if you 5310 Conference Unit does not have a mouse attached. The 5324
IP Phone will activate the 5310 Conference Saucer when it detects that the Conference Module has
been installed in the back of the phone.
To start a Conference
• Press SPEAKER key
or just start dialing.
Adjust the conference unit volume
• Press Volume Up or Volume Down.
Mute the conference unit
To mute the conference unit so that conversation in the meeting room cannot be heard by individuals
being conferenced:
• Press (Mute key).
Exit the conference
• Hang
up.
40