Mitel SX-200 - Manual (Page 15)

5312/5324 IP Phones User Guide
Redial
To redial the last number that you manually dialed:
1. Lift the handset (optional).
2. Press ( REDIAL ).
Speed Call Keys
You may use Speed Call Keys to make a call or to send a string of digits during a call (press a Speed
Call Key during a call to send a multi–digit password, for instance).
To dial a stored Speed Call number:
1. Lift the handset (optional).
2. Press a Speed Call key.
To store a Speed Call number:
1. Press ( MENU ).
2. Press # or the No softkey until "Personal Keys?" appears.
3. Press * or the Yes softkey.
4. Press a personal key that isn't a line key.
5. Press * or the Change softkey
6. On a 5324 IP Phone only, press the Yes softkey.
7. Do one of the following:
• To enter a new number, dial the number (press
( HOLD ) between digits to create a
one–second pause during dialing; press ( HOLD ) more than once to lengthen the
pause.)
• To enter a trunk flash, press
( TRANS/CONF ). (See "Trunk Flash" for more
information about the use of this feature.)
• To enter the last number dialed, press
( REDIAL ).
8. On a 5312 IP Phone only, press the personal key again.
9. Do one of the following:
• To make the number private, press * or the Priv softkey
• To keep the number visible, press # or the Save softkey.
10. Press ( MENU ).
9