Mitel SX-200 - Manual (Page 43)

5312/5324 IP Phones User Guide
Date and Time Setup
This feature is available on the 5324 IP Phone only.
You can change the time and date that appears on the displays. The time can be displayed in either a
12- or 24-hour format, depending on system programming.
To set the time:
1. Press (MENU).
2. Press the No softkey repeatedly until Time? appears on the display.
3. Enter the time in the correct format.
4. Press the AM or PM softkeys (if necessary).
5. Press the Save softkey.
To set the date:
1. Press (MENU).
2. Press the No softkey repeatedly until Date? appears on the display.
3. Press the Yes softkey.
4. Enter the date in the indicated format.
5. Press the Save softkey.
Release
Release lets you disconnect from an attempted Call Transfer or Conference Call without hanging up
the handset. Release is useful when you encounter a busy or unavailable party.
To release from an attempted transfer or conference call, do one of the following:
• Press the Release feature key or the Release softkey.
37