Magellan 500 - Manual (Page 92)

Using the eXplorist with MapSend 85
Transfer the Files using the Magellan Conversion Manager: Launch the Magellan Conversion
Manager (installed from the Magellan Wizard). It can be found under the ‘Start’ menu - Start
> Programs > Magellan > eXplorist 500 > Magellan Conversion Manager.
When first opened, on the Welcome window select ‘Transfer Map Regions’ and click Next.
A reminder to connect the Magellan eXplorist to the computer is presented. Click Next.
The Magellan Conversion Manager will
automatically search for detail maps
(*.imi) or background maps (*.mgi) on
your computer available for uploading.
The Map region selection window is
displayed. In this window you will
select which map regions that will be
uploaded.
If you do not see a map that you
believe you have saved, you can
browse for it by clicking on the
Magnifying glass icon.
(In this example we are uploading a
detailed map, background maps are
uploaded following these same
guidelines.)
The popup menu to the right shows where the files will be saved. If you have an external SD
card reader/writer, you can select it there. Please remember that large map regions should
be saved to an SD card. (Please make sure that there is room on the SD card for the map you
want to upload.) The internal memory of the eXplorist is limited and large detail maps with
either not fit or will take up memory that you will need later for saving POIs and creating
routes.
Select the map regions you want to upload by clicking the checkbox next to the map region
name in the list of map regions. When at least one map is selected, the Next button is made
active. When you have all the map regions you want upload selected, click Next.
The map regions will be transferring and two progress bars will indicate the progress. When
the transfer is completed you will see a ‘Transfer completed’ message and the Next button
will be active. Click Next. The final window just verifies that the transfer has been
completed. Click Finish.
The map region has now been uploaded to either the Magellan eXplorist, the SD card
mounted in the eXplorist, or to an SD card in a card reader/writer. If you had chosen an
external SD card reader/writer, remove the card and install it in your eXplorist.
Select Map: Now that the detailed or background map has been successfully uploaded,
select the map for use. Press Menu. Highlight
Preferences and press ENTER. Highlight
Active Setup and press ENTER. Highlight Detail Maps or Background Maps field and
press ENTER. Select map and press ENTER. (Note: for a detail map, you need to select
Select Map from the popup menu and press ENTER.)