Muratec QUADACCESS MFX-2590 - Manual (Page 86)

Managing User Access/Cost Accounting 2-37
1
2
Management
Specifying the Charge Settings
Set the required functions to ON, and set the charge per page.
Press .
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [User Access/Cost Accounting].
5
Press [Charge Setting].
6
Select the function to set.
7
Press [ON].
8
Press [OFF] to disable the charge setting.