Muratec QUADACCESS MFX-2590 - Manual (Page 111)

2-62 Specifying the Network Settings
Setting the Primary LDAP Server „
You can set the LDAP server to use for LDAP searching from the registered LDAP
servers.
Make sure to register at least one LDAP server in advance.
Press .
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Network Settings].
5
Press [LDAP Server Setting].
6
Press [Default Server].
7
Select the LDAP server to use, and press [Enter].
8