Muratec QUADACCESS MFX-2590 - Manual (Page 48)

Logging In / Logging Out 1-41
1
Using Common Functions
Logging In / Logging Out
To use the machine after receiving user authentication, perform a login. If you perform a
login, you can use the following functions.
Personal settings • *1 (See page 1-37.)
Printing and transmitting documents in the user box • *1
TTI (using user registered information) •
Scan path notification •
Security print •
User access/cost accounting • *1
Journal report (with the user name printing in the sender field) •
*1 These functions cannot be used when the user authentication method is set to
[Network].
Note
For details on setting user authentication, refer to “ • Setting User Authentication ”. (See
page 2-32.)
When the “Guest Account Setting” is effective at Machine Policy Setting on the •
OfficeBridge, press to use the machine as a guest.
Logging In
Press on the
1
ready screen.
If the ready screen is not displayed, press to display the ready screen, and then press
.
Select the user ID, and press [Enter].
2
If the user ID entry screen is displayed, press [User ID] to select the user or enter the user •
ID, and press [Enter].
To set user authentication or the machine policy, press [Input User] to enter the user ID.
•