Muratec QUADACCESS MFX-2590 - Manual (Page 75)

2-26 Function Protect Settings
Setting Function Protection
Note
To set function protection, it is necessary to set an administrator password (see page
2-4) and protect passcode (see page 2-7) in advance.
Press .
1
Press
2
the [Management] tab.
If an administrator password is set, press [Admin Password].
3
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Function Protect Setting].
5
Enter the protect passcode, and press [Enter].
6