Muratec QUADACCESS MFX-2590 - Manual (Page 79)

2-30 Setting Mode Protection
Setting Mode Protection
You can prohibit the copy, scanner, fax, or printer modes from being used.
For example, if you enable Copy Protect, the machine will not switch to the copy screen,
even if is pressed.
Note
If you prohibit the use of the mode set as the • ready screen, the ready screen will
automatically be changed to the My MFP screen.
You can also prohibit the use of modes by user policy using the user policy settings •
of OfficeBridge. For details, refer to Chapter 3, “Setting Security” in the OfficeBridge
Guide.
Press .
1
Press
2
the [Management] tab.
If an administrator password is set,
3
press [Admin Password].
If an administrator password is not set, proceed to step 5.
Enter the administrator password, and press [Enter].
4
Press [Mode Protect Setting].
5