Additional printer setup, Selecting a location for the printer – Minolta E260 User Manual
Page 14
Additional printer setup
Selecting a location for the printer
When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install
any options, leave enough room for them also. It is important to:
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
–
Away from the direct airflow of air conditioners, heaters, or ventilators
–
Free from direct sunlight, humidity extremes, or temperature fluctuations
–
Clean, dry, and free of dust
•
Allow the following recommended amount of space around the printer for proper ventilation:
1
Rear
300 mm (12.0 in.)
2
Front
300 mm (12.0 in.)
3
Right side 200 mm (8.0 in.)
4
Left side
12.7 mm (0.5 in.)
5
Top
300 mm (12.0 in.)
Additional printer setup
14