Motorola DSR205 - Manual (Page 55)

Options
DSR205 User Guide 45
Installation Settings
Tune in Satellite Signal.
This option allows you to see
the strength of the signal
your antenna is receiving.
Set Remote Control
Address. This option allows
you to control up to four
receivers in a centralized
area with one or more remote
controls. Each receiver
requires a separate address.
The default address is 0000.
On the front panel of your receiver press the Menu button to bring up the Menu
screen.
• Choose Options.
• Choose option 6 (Change System Settings).
• Choose option 3 (Installation Settings).
• On the Installation Settings menu, choose option 2 (Set Remote Control
Address). Now follow the instructions on the Remote Control Address screen.
• If you have four receivers, you will have to change the addresses on three of
them: they will have address of 0000, 0001, 0002, and 0003.
To program your remote control for each receiver, hold down the SAT key on the
remote control until the light flashes. Once the light begins to flash enter the
desired address (0000, 0001, 0002, or 0003).
System Status
This is a view-only screen
that displays information
about the status of the
receiver.
Trip Counter. Trip Counter
displays the number of
message updates from your
service provider.