beautypg.com

Motorola DSR205 User Manual

Page 4

background image

Safety

ii

Do Not Operate near Water.

Do not use this product near water, for example, near a

bath tub, wash bowl, kitchen sink, swimming pool, laundry tub, in a wet basement, or in

similar situations.

Objects or Liquid in the Unit.

Never push any object into this unit through any of

its openings because they may touch dangerous voltage points or short out the parts. This could

cause a fire or any electrical shock. Do not spill liquid of any kind on the unit.

Laser Light.

Use or controls or adjustments or performance of procedures other than those

specified may result in hazardous radiation exposure. Avoid direct eye exposure. Keep out of

reach of children. The laser light emitted from this device should not be directed towards

people, under any circumstances.

Overloading.

Do not overload power outlets or extension cords. This can result in a risk of

fire or electrical shock.

Damage Requiring Service.

Unplug this equipment from the power source, and

contact a qualified service provider if any of the following situations occurs:

- If the power supply cord or plug is damaged.

- If liquid or objects have fallen into the unit.

- If the unit became wet from rain or water.

- If the unit was dropped or damaged.

- If the unit’s performance changes.

Service.

Do not try to service this product yourself. If you open or remove the cover, you

may be exposed to dangerous voltage or other hazards and may void the unit’s warranty.

Contact a qualified service provider for all service.

Mounting and Placement.

Do not place this product on an unstable surface such as a

cart, stand, tripod, bracket, or table. It may fall, causing serious injury to a child, adult, or to the

unit itself. To mount the unit, follow the manufacturer’s instructions, and use a mounting

accessory recommended by the manufacturer. Do not place this product directly on wood or

simulated wood surfaces because these surfaces may be damaged.

Power Lines.

Do not locate the satellite antenna system near overhead power lines,

electrical light or power circuits, or where it can fall into power lines or circuits. When

installing a satellite antenna system, avoid dangerous contact with power lines or circuits.

Outdoor Antenna Grounding.

To provide some protection against voltage surges,

lightning, and built-up static charges, make sure that the satellite antenna is properly grounded.

Outdoor Cable Protection.

Protect all outdoor connections from moisture. During

installation, treat all of the cable connectors on your LNB with coax seal, even if the connection

is installed under a weatherproof cover. Internal heating can draw moisture or condensation

into the covering of the unit and affect its operation. Do not use silicone seal because it has

a tendency to form air pockets.

Replacement Parts.

If your receiver requires repairs, contact your equipment provider,

who will be able to assist you.

Safety Check.

After the unit is serviced or repaired, ask the service technician to perform

safety checks to find out if the unit is in proper operating condition.