Motorola DSR205 - Manual (Page 12)

1
2
Front Panel Key Descriptions
1. POWER. Press this key to turn the receiver power on/off and to watch pro-
grams in SAT mode.
2. REMOTE . An indicator dot blinks each time you press a key on the remote
control.
3. SIGNAL . An indicator lights up when a satellite signal is present. Green
indicates a good signal. Red indicates no signal.
Back Panel Connections
1. SATELLITE IN. This terminal receives LNB input.
2. ANTENNA IN. This is an off-air antenna terminal.
3. CH3 CH4. This switch determines the channel (3 or 4) to which you set your
TV to receive satellite broadcasts. The setting should be the same as the TV
setting for use with your VCR (usually channel 3).
4. OUT TO TV. This supplies the VHF signal to your TV.
5. AUDIO OUT (R L). These are audio outputs, which may be used to connect to
your TV or VCR. Volume levels are not adjustable.
6. TO VCR. This video output jack may be connected to your VCR input
connections for VCR taping.
7. POWER. This is the power block input.
+ +
R
L
AUDIO VIDEO
+12V DC
SAT IN
ANT
IN
TV
OUT
Chan
4 3
2 3 4 5 6 7 1