Motorola DSR205 - Manual (Page 17)

Installation
DSR205 User Guide 7
Viewing and Language Settings
Channel Information. The Channel Information option allows you to turn the
header (top of screen) and banner (bottom of screen) On or Off. The default
setting is On.
Subtitles. The Subtitles option allows you to select the language for subtitles (if
available for the particular program) or keep them turned off. The default setting is
None.
Language. The Language option allows you to select the language of the on-
screen menus and audio for your programs. The default setting is English.
TV Viewing. The TV Viewing option allows you to select the size of the viewing
area. Select the Standard option if your TV screen is a typical screen with a 4:3
ratio of width to height. Select Wide if your TV screen is a wide screen with a 16:9
ratio (as in HDTV’s or digital TV’s). The default setting is Standard.
Audio Settings
If you are in SAT mode (digital) broadcast, two options appear on the Audio
Settings menu.
Audio Connections. Select option 1 (Audio Connections), and you will be able to
select either TV or HiFi (the default is TV). Select TV if the receiver’s AUDIO
OUT port is connected to your TV. Select HiFi if it is connected to your stereo
system.
Satellite Audio. Select option 2 and then select Mono, Stereo, or Surround.
Installation Settings
Tune in Satellite Signal. This option allows you to see the strength of the signal
your antenna is receiving.
Set Remote Control Address. This option allows you to control up to four
receivers in a centralized area, with one or more remote controls. Each receiver
requires a separate address. The default address is 0000.
On the front panel of your receiver press the Menu button to bring up the Menu
screen.
• Choose Options.
• Choose option 6 (Change System Settings).
• Choose option 3 (Installation Settings).