Motorola PRIVACY PLUS B7 - Manual (Page 63)

MAEPF-22628-O
O, P, S, AL, AG
Call Alert Page Operation (cont.)
5. Enter the second digit of the location number.
The display shows the location number for a few
seconds.
6. Then, the radio goes to that position in the list,
and the display alternates between showing that
list member’s name and ID number.
Note: If you enter a location number that does
not exist (for example, “24”), the display will
show “INVALID ENTRY,” and the radio will sound
an invalid-keypress tone and return back to step
4 of this procedure.
7. Press the PTT switch to send the ID number.
8a. If you hear five beeps, the ID number has been
received by the system, and the radio you are
paging is on the air and has received your page.
The radio automatically returns to the home
display.
or
8b. If you hear one beep, the ID number has been
received by the system, but the radio you are
paging is not on the air; your radio remains in
the Call Alert mode. You can either go back to
step 5 and press the PTT switch to send the ID
number again, or press the HOME key or the
page key (normally side button 2) to hang up and
return to the home display.
Note: If after six seconds the called radio fails to
acknowledge the alert, a low-pitched alert tone
s o u n d s a n d t h e d i s p l a y s h o w s “N O
ACKNOWLEDGE.” Try again or press the HOME
key to exit.
61
61 Trunked Radio Features Operation
(cont.)
2 A B C 1 3 D E F
6 MNO 5 JKL 4 G H I
7
P R S
8
TUV
9
W X Y
0
HOME