Motorola PRIVACY PLUS B7 - Manual (Page 62)

60 Trunked Radio Features Operation
(cont.)
MAEPF-22628-O
C, AH, K, L, M 60
Call Alert Page Operation (cont.)
Paging an ID Number at a Location in the Call
List
1. You can also Call Alert page an ID number at a
particular location in the preprogrammed call list
(for example, the fifth location in the list would be
position “5”). To do this, press the page button
(normally side button 2).
Notes:
• If you radio has been so programmed by the
RSS, press the right arrow key ( ) until
“PAGE” appears on the display, then press
the key below “PAGE.”
• The same list is shared by both Call Alert
and Private Conversation features.
2. T h e d i s p l a y s h o w s t h e l a s t I D n u m b e r
transmitted or received. You can now select an
ID number from the list.
3. To enter the list, press either the right ( )
arrow key or the left ( ) arrow key. The right
arrow key will take you forwards to the first or
next member of the list; the left arrow key will
take you backwards to the last or previous
member of the list.
Note: The last member of the list will be the “last
ID transmitted or received.” This member can
also be found at location “00” in the list.
4. Enter the first digit of the location number.
a. If there are fewer than 10 members in the
list, the radio goes immediately to that
position in the list, and the display alternates
between showing that list member’s name
and ID number. Go directly to step 7.
b. If there are 10 or more members in the list,
the display changes to show “ID LOC#X_”
(where X is the first digit). The cursor will
flash to show the location of the second
digit. Continue with step 5.
HOME
2
A B C
3 D E F 1