Motorola PRIVACY PLUS B7 - Manual (Page 17)

2 A B C 3 D E F 1
15 Basic Radio Operation (cont.)
MAEPF-22622-O
S, T, V MAEPF-22484-O 15
3. Press the key below “SUB.” The current system
and mode are displayed; the system is on
constantly and the mode is flashing.
4a. Press the right arrow key ( ) until the desired
system and mode appear on the display.
or
4b. Enter the number (1 through 10) of the desired
mode from the keypad. The display shows the
selected system and mode.
5. Press the HOME key or the PTT switch to store
the displayed system and mode. This will become
the new “home” (default) display. If you press the
PTT switch, you will also transmit on the
displayed system and mode (see “Transmitting”;
“Trunked Systems”).
Selecting a Conventional Mode
Before you can send or receive in conventional
operation, the radio must be set to the desired
mode; in conventional operation, a mode is a
conventional channel and all features “slaved” to it.
Mode selector knob position 16 selects conventional
operation. Your radio can have up to 10 different
conventional modes associated with it. To select a
mode:
1. Turn the radio on and set the mode selector
knob to the conventional operation position (16).
2 A B C 1 3 D E F
6 MNO 5
JKL
4 G H I
7
P R S
8
TUV
9
W X Y
0
HOME
2
A B C
1 3 D E F
6 MNO 5 JKL 4 G H I
7 P R S 8 TUV 9 W X Y
0
HOME
13
15
1
3
5
7
9 11